RIGGING
\n
Crosby shackles meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B20.26. Working Load Limit permanently shown on every shackle. Capacities 1/3 thru 150 metric tons. They Meet the performance requirements of Federal Specifications RR-C-271D Type IVA, Grade A Class 3, except for those provisions required of the contractor.
\n<h4>Shackle Features</h4>\n<ul>\n<li>Forged quenched and tempered, with alloy pins.</li>\n<li>Hot Dip galvanized or self-colored.</li>\n<li>Fatigue rated.</li>\n<li>Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification.</li>\n<li>Shackles 85 metric tons and larger can be provided as follows.\n<ul>\n<li>Non destructive tested</li>\n<li>Serialized pin and bow</li>\n<li>Material certification. Chemical Certification must be requested at time of order.</li>\n</ul>\n</li>\n<li>Look for the Red Pin, the mark of genuine Crosby quality.</li>\n</ul>\n</div>\n
1" G-209 GALV. SHACKLE
\n</div>\n
Crosby Shackle 1-1/4" G-209 Galvanized
\n</div>\n
1-1/2 SHACKLE MADE IN U.S.A.
\n</div>\n
Crosby 3/8" G-209 GALV. SHACKLE
\n</div>\n
Crosby 1/2" G-209 GALV. SHACKLE
\n</div>\n
Crosby 5/8" G-209 GALVANIZED SHACKLE
\n</div>\n
Crosby 3/4" G-209 GALVANIZED SHACKLE
\n</div>\n
Crosby 7/8" G-209 GALVANIZED SHACKLE
\n</div>\n\n
CLEVIS GRAB HOOK 1/4 G-43
\n\n</div>\n\n
CLEVIS GRAB HOOK 5/16 GR 43
\n\n</div>\n\n
CLEVIS GRAB HOOK 3/8" HIGH TEST
\n\n</div>\n\n
CLEVIS GRAB HOOK 1/2
\n\n</div>\n\n
CLEVIS GRAB HOOK 5/8 GR 43
\n\n</div>1/2" CLEVIS GRAB HOOK GRADE 70